
Reference illustration — produced to your drawing
Nails & Spikes
Siding Nails
Siding nails fasten cladding such as wood, fibre-cement, and vinyl siding to the wall framing. They are supplied smooth or ring shank, with corrosion-resistant finishes for exterior exposure.
Used to install exterior wall cladding and trim. Bought by siding contractors and builders.
This is one of the types covered by our Custom Fasteners page — materials, tolerances, lot sizes and how we quote the whole family.
Typical price US$0.50 – US$15.00 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.
Standard
ASTM F1667
Size range
1 1/2 – 3 in · 38 – 76 mm
MOQ
From 50 pcs
Lead time
Samples 5–10 days
What we produce
- Smooth or ring shank for siding hold
- Flat head seats flush with the siding face
- Cold headed from drawn carbon steel wire
- Hot-dip galvanized or stainless steel 316 finish
- Diamond point drives into wall framing
Specification notes
- Common lengths from 1 1/2 in to 3 in (38 – 76 mm)
- Ring shank for fibre-cement and wood siding
- Custom lengths produced per drawing
Specifications
Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.
| Standard | ASTM F1667 |
|---|---|
| Size range | 1 1/2 – 3 in · 38 – 76 mm |
| Threads | Not applicable |
| Head / geometry | Flat head, smooth or ring shank |
| Materials | Stainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium |
| Finishes | As machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network) |
| Precision | ±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions |
| Marking | Head marking, grade marking or your own identification mark per drawing |
| Documents | Material certificate (MTR) with every batch, plus pre-shipment photos before dispatch |
| MOQ | From 50 pieces per type and material · samples from 1 piece |
| Sample lead time | 5–10 days |
| Production lead time | 25–35 days after sample approval |
| Quote | Within 24 hours, with DFM feedback |
Other nails & spikes we manufacture
See all 179 part types →Send us the drawing
We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.
Request a quote