
Reference illustration — produced to your drawing
Nails & Spikes
Common Nails
Common nails are general-purpose round wire nails with a thick shank, a flat head, and a diamond point. They are the standard nail for most wood-to-wood fastening.
Used in general framing, sheathing, boxing, and rough carpentry. Bought by framing contractors and construction supply distributors.
This is one of the types covered by our Custom Fasteners page — materials, tolerances, lot sizes and how we quote the whole family.
Typical price US$0.50 – US$15.00 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.
Standard
ASTM F1667
Size range
1 – 6 in · 25 – 152 mm
MOQ
From 50 pcs
Lead time
Samples 5–10 days
What we produce
- Cold headed from drawn carbon steel wire
- Thicker shank for higher shear strength
- Flat head resists pull-through under load
- Diamond point drives easily into framing lumber
- Supplied bright or electro-galvanized
Specification notes
- Sizes from 2d (1 in) to 60d (6 in)
- Custom lengths and gauges produced per drawing
- Material certificate and pre-shipment photos provided
Specifications
Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.
| Standard | ASTM F1667 |
|---|---|
| Size range | 1 – 6 in · 25 – 152 mm |
| Threads | Not applicable |
| Head / geometry | Flat head, smooth shank, diamond point |
| Materials | Stainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium |
| Finishes | As machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network) |
| Precision | ±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions |
| Marking | Head marking, grade marking or your own identification mark per drawing |
| Documents | Material certificate (MTR) with every batch, plus pre-shipment photos before dispatch |
| MOQ | From 50 pieces per type and material · samples from 1 piece |
| Sample lead time | 5–10 days |
| Production lead time | 25–35 days after sample approval |
| Quote | Within 24 hours, with DFM feedback |
Other nails & spikes we manufacture
See all 179 part types →Send us the drawing
We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.
Request a quote