Large Flange Dome Head Blind Rivets

Reference illustration — produced to your drawing

Rivets

Large Flange Dome Head Blind Rivets

Large flange dome head blind rivets combine a domed profile with an oversized flange that bears on a wide area of the sheet. They spread the load and give a finished dome appearance.

Used where a wide bearing surface and a neat domed head are both wanted, such as on panels, trailers, and enclosures. Buyers are fabricators and vehicle body builders.

This is one of the types covered by our Custom Fasteners page — materials, tolerances, lot sizes and how we quote the whole family.

Typical price US$0.50 – US$15.00 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.

Standard

DIN 7337 B / IFI 114

Size range

Body diameter 3.2 – 6.4 mm · 1/8 – 1/4 in

MOQ

From 50 pcs

Lead time

Samples 5–10 days

What we produce

  • Domed head with oversized flange
  • Wide bearing area for thin or soft sheet
  • Aluminium, steel, or stainless 304/316 body
  • Steel or stainless mandrel
  • Metric and inch sizes
  • Set with a standard blind rivet tool

Specification notes

  • Flange diameter sized to spread load
  • Grip range matched to sheet stack
  • Flush and painted variants on request

Specifications

Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.

StandardDIN 7337 B / IFI 114
Size rangeBody diameter 3.2 – 6.4 mm · 1/8 – 1/4 in
ThreadsNot applicable
Head / geometryDome head with large flange; break mandrel set
MaterialsStainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium
FinishesAs machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network)
Precision±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions
MarkingHead marking, grade marking or your own identification mark per drawing
DocumentsMaterial certificate (MTR) with every batch, plus pre-shipment photos before dispatch
MOQFrom 50 pieces per type and material · samples from 1 piece
Sample lead time5–10 days
Production lead time25–35 days after sample approval
QuoteWithin 24 hours, with DFM feedback

Other rivets we manufacture

See all 179 part types →

Send us the drawing

We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.

Request a quote