
Reference illustration — produced to your drawing
Rivets
Grooved Dome Closed-End Blind Rivets
Grooved dome closed-end blind rivets have a domed head and a closed tail, with lengthwise grooves on the body that key into the sheet during setting. The grooves increase the lock between rivet and sheet for higher joint strength.
Used where a strong, sealed, one-side fixing is needed in enclosures, cabinets, and light structural assemblies. Buyers are sheet metal fabricators and cabinet makers.
This is one of the types covered by our Custom Fasteners page — materials, tolerances, lot sizes and how we quote the whole family.
Typical price US$0.50 – US$15.00 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.
Standard
To your drawing
Size range
Body diameter 3.2 – 6.4 mm · 1/8 – 1/4 in
MOQ
From 50 pcs
Lead time
Samples 5–10 days
What we produce
- Grooved body keys into the sheet when set
- Closed tail seals the joint
- Aluminium or stainless steel 304/316 body
- Steel or stainless mandrel
- Dome head finish
- Stronger lock than plain open end rivets
Specification notes
- Groove pattern per manufacturer drawing
- Closed end keeps the mandrel retained
- Grip range matched to sheet thickness
Specifications
Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.
| Size range | Body diameter 3.2 – 6.4 mm · 1/8 – 1/4 in |
|---|---|
| Threads | Not applicable |
| Head / geometry | Dome head with grooved closed-end body; break mandrel set |
| Materials | Stainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium |
| Finishes | As machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network) |
| Precision | ±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions |
| Marking | Head marking, grade marking or your own identification mark per drawing |
| Documents | Material certificate (MTR) with every batch, plus pre-shipment photos before dispatch |
| MOQ | From 50 pieces per type and material · samples from 1 piece |
| Sample lead time | 5–10 days |
| Production lead time | 25–35 days after sample approval |
| Quote | Within 24 hours, with DFM feedback |
Other rivets we manufacture
See all 179 part types →Send us the drawing
We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.
Request a quote