Wood Screws

Reference illustration — produced to your drawing

Screws

Wood Screws

A wood screw has a tapered shank with a coarse thread and a sharp point that cuts into timber, drawing the head tight as it is driven. The shank taper lets the head seat flush without a nut.

It joins timber, board and hardware across furniture, joinery and general construction. Carpenters, cabinet makers and hardware distributors buy it for everyday wood fastening.

This is one of the types covered by our Custom Screws page — materials, tolerances, lot sizes and how we quote the whole family.

Typical price US$0.08 – US$1.80 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.

Standard

ASME B18.6.1 / DIN 7997

Size range

#2 – #24 · M2 – M8

MOQ

From 50 pcs

Lead time

Samples 5–10 days

What we produce

  • Tapered shank seats without a nut
  • Coarse thread grips timber fibres
  • Flat, oval and round head styles
  • Carbon steel, stainless 304 or brass
  • Cold headed and thread rolled to drawing
  • Zinc, brass or plain finish options

Specification notes

  • Sizes #2 to #24 and M2 to M8
  • Common lengths 6 mm to 150 mm
  • Pilot hole size stated per shank gauge

Specifications

Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.

StandardASME B18.6.1 / DIN 7997
Size range#2 – #24 · M2 – M8
ThreadsCoarse wood screw thread · metric
Head / geometryFlat, oval or round head; slotted, cross recess or square drive
MaterialsStainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium
FinishesAs machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network)
Precision±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions
MarkingHead marking, grade marking or your own identification mark per drawing
DocumentsMaterial certificate (MTR) with every batch, plus pre-shipment photos before dispatch
MOQFrom 50 pieces per type and material · samples from 1 piece
Sample lead time5–10 days
Production lead time25–35 days after sample approval
QuoteWithin 24 hours, with DFM feedback

Other screws we manufacture

See all 179 part types →

Send us the drawing

We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.

Request a quote